地址:北京市丰台
电话:67506536
传真:60260516
手机:13911696698
邮箱:13911696698@163.com
QQ:139696698
耐高温电力电缆
Hign temperature cable
一、产品特点及用途
本产品具有耐高温、耐低温、柔软、耐酸碱及腐蚀性气体、防水等特点,高温环境下电性能稳定,载流量大,使用寿命长。广泛实用于发电、冶金、化工、石油等工矿企业,在0.6/1kV及以下恶劣环境中连接工业移动式电气设备传输电力线路用。
The products have the features of resisting high and low temperature,anti-corrosion and softness,they and used as power transmission and distribution lines of 0.6/1kV under bad environment in the electric generation, petrol-chemical and oil industrics.
二、产品执行标准
企业标准、阻燃耐火性能试验执行GB/19666-2005。
Enterprise standard、
三、使用特性:
1. 工频额定电压U0/U为0.6/1kV
Rated power-frequency voltage U0/U: 0.6/1kV
2. 电缆长期允许的环境最高工作温度:
聚氯乙烯护套为70℃、90℃、105℃。
硅橡胶护套不超过:180℃。
氟塑料护套不超过200℃.
Max.operation temperature for a long period .
PVC sheath 70℃、90℃、105℃。
Silicone rubber sheath: 180℃.
Fluorplastic sheath: 200℃.
3. 电缆的敷设温度应不低于:
固定敷设-60℃,非固定敷设-20℃.
The ambient temperature should not be lower than -60℃ for fixed cable taying and not be lower Than -20℃ for temporary cable laying.
4. 推荐的允许弯曲半径:
氟塑料护套的电缆和铠装电缆,应不小于电缆外径的12倍。
聚氯乙烯护套的电缆,应不小于电缆外径的10倍。
Rccommended allowable bending radius:
Not lessthan 12 times overall diameter of cable for fluorplastic sheath cables and armored cables.
Not less than 10 times overall diameter of cable for PVC sheath cables.
四、主要技术指标:
Ⅳ. Main technical parameters
1. 主要技术指标如下表:
Main technical parameters as per table below
标称截面 Nominal cross Sectional area mm2 | 导体结构 | 20℃时导体直流电阻Ω/km | 交流电压试验 | ||
种类 Class | 根数/单丝标称直径 | 不镀锡 | 镀锡 | A.C Test Voltage | |
1.5 | A 、B | 1/1.38,7/0.52 | 12.1 | 12.2 | 3500V 5min 不击穿 |
R | 30/0.25 | 13.3 | 13.7 | ||
2.5 | A 、B | 1/1.78,7/0.68 | 7.41 | 7.56 | |
R | 49/0.25 | 7.98 | 8.21 | ||
4 | A 、B | 1/2.24 | 4.61 | 4.70 | |
R | 56/0.30 | 4.95 | 5.09 | ||
6 | A 、B | 1/2.76 | 3.08 | 3.11 | |
R | 84/0.30 | 3.30 | 3.39 | ||
10 | A 、B | 7/1.33 | 1.83 | 1.84 | |
R | 84/0.40 | 1.91 | 1.95 | ||
16 | A 、B | 7/1.70 | 1.15 | 1.16 | |
R | 126/0.40 | 1.21 | 1.24 | ||
25 | A 、B | 7/2.12 | 0.727 | 0.734 | |
R | 196/0.40 | 0.780 | 0.795 | ||
35 | A 、B | 7/2.55 | 0.524 | 0.529 | |
R | 276/0.40 | 0.554 | 0.565 | ||
50 | A 、B | 7/2.97 | 0.387 | 0.391 | |
R | 396/0.40 | 0.386 | 0.393 | ||
70 | A 、B | 14/2.55 | 0.268 | 0.270 | |
R | 360/0.50 | 0.272 | 0.277 | ||
95 | A 、B | 19/2.55 | 0.193 | 0.195 | |
R | 475/0.50 | 0.206 | 0.210 | ||
120 | A 、B | 19/2.97 | 0.153 | 0.154 | |
R | 608/0.50 | 0.161 | 0.164 | ||
150 | A 、B | 30/2.55 | 0.124 | 0.126 | |
R | 756/0.50 | 0.129 | 0.132 | ||
185 | A 、B | 37/2.55 | 0.0991 | 0.100 | |
R | 925/0.50 | 0.106 | 0.108 | ||
240 | A 、B | 37/2.97 | 0.0754 | 0.0762 | |
R | 1221/0.50 | 0.0801 | 0.0817 |
2.载流量 Current carring capacity
额定电压0.6/1kV及以下氟塑料绝缘电缆(电线)
Fluoroplastic insulated cables (wires)of rated Voltage up to and including 600/1000V
导体Conductor | 截面Nom-cross sectional area | 单芯 Single-core | 二芯 2-core | 三芯四芯 3、4-core | 五芯 5-core | |
○ ○○ | ○○○ | |||||
铜导体 Copper Conductor | 1.5 | 42 | 46 | 38 | 34 | 35 |
2.5 | 58 | 64 | 52 | 47 | 49 | |
4 | 79 | 87 | 72 | 64 | 66 | |
6 | 97 | 107 | 88 | 79 | 82 | |
10 | 152 | 167 | 139 | 123 | 128 | |
16 | 190 | 210 | 174 | 155 | 161 | |
25 | 271 | 298 | 247 | 220 | 229 | |
35 | 345 | 379 | 314 | 281 | 292 | |
50 | 429 | 472 | 391 | 349 | 362 | |
70 | 513 | 565 | 468 | 418 | 434 | |
95 | 599 | 659 | 545 | 487 | 506 | |
120 | 697 | 766 | 635 | 567 | 589 | |
150 | 802 | 882 | 731 | 652 | 678 | |
185 | 897 | 986 | 817 | 730 | 758 | |
240 | 1047 | 1152 | 953 | 852 | 885 | |
300 | 1161 | 1277 | - | - | - |
3.不同温度下的修正系数
Current rating factors for variation in ambient air temperature
导体温度℃Conductor temperature℃ | 环境空气温度℃ Air temperature℃ | 75 | 85 | 95 | 105 | 115 | 125 | 135 | 145 |
200 | 修正系数 Rating factors | 1.18 | 1.13 | 1.06 | 1 | 0.93 | 0.88 | 0.77 | 0.68 |
五、基本型号及名称
Ⅴ. Basic type and product name
型 号 Type | 名 称 Designation |
FF、FFR | 铜芯氟塑料绝缘氟塑料护套高温电力(软)电缆
|
NH-FF、NH-FFR | 铜芯氟塑料绝缘氟塑料护套高温耐火电力(软)电缆
|
FF22 FFR22 | 铜芯氟塑料绝缘氟塑料护套钢带铠装高温电力(软)电缆
|
NH-FF22 NH-FFR22 | 铜芯氟塑料绝缘氟塑料护套钢带铠装高温耐火电力(软)电缆
|
FV FVR | 铜芯氟塑料绝缘阻燃聚氯乙烯护套高温电力(软)电缆
|
NH-FVR NH-FVR | 铜芯氟塑料绝缘阻燃聚氯乙烯护套高温耐火电力(软)电缆
|
FV22 FVR22 | 铜芯氟塑料绝缘阻燃聚氯乙烯护套钢带铠装高温电力(软)电缆
|
NH-FV22 NH-FVR22 | 铜芯氟塑料绝缘阻燃聚氯乙烯护套钢带铠装高温耐火电力(软)电缆
|
FG FGR | 铜芯氟塑料绝缘硅橡胶护套高温电力(软)电缆
|
NH-FG NH-FGR | 铜芯氟塑料绝缘硅橡胶护套高温耐火电力(软)电缆
|
FG22 FGR22 | 铜芯氟塑料绝缘硅橡胶护套钢带铠装高温电力(软)电缆
|
NH-FG22 NH-FGR22 | 铜芯氟塑料绝缘硅橡胶护套钢带铠装高温耐火电力(软)电缆
|
六、型号说明
1. 型号表示方法
护套材料代号
装铠材料代号
导体类型
衬层材料代号
绝缘材料代号
阻燃耐火代号
2. 代号名称及含义 Code and its indication
项目 Item | 代号 Code | 代号含义 Code Indication | ||
阻燃特性 Flame-proof Characteristics | / | 非阻燃可省略 Non flame-proof (omission) | ||
ZA | A 类阻燃代号 Class A flame-proof | |||
ZB | B 类阻燃代号 Class B flame-proof | |||
ZC | C 类阻燃代号 Class C flame-proof | |||
ZD | D 类阻燃代号 Class D flame-proof | |||
DDZ | 低卤低烟阻燃代号 Low halogen and low smoke flame proof | |||
WDZ | 无卤低烟阻燃代号 Halogen-free and low smoke flame proof | |||
NH | 耐火代号 Fire-resistant code | |||
绝缘 Insulation | F | F46 | 聚全氟乙丙烯 | |
F4 | 聚四氟乙烯 | |||
PFA | 可溶性聚四氟 | |||
屏蔽 | P | P | 铜丝编织 | |
P1 | 镀锡丝编织 | |||
P2 | 铜带(铜塑复合带) | |||
P3 | 铝带(铝塑复合带) | |||
护套 | 内护套 | F | 氟塑料 | |
V | 聚氯乙烯 | |||
G | 硅橡胶 | |||
装铠 | 2 | 钢带铠装 | ||
3 | 钢丝铠装 | |||
外护套 | 2 | 聚氯乙烯 | ||
4 | 硅橡胶 | |||
5 | 氟塑料 | |||
导体种类 Conductor type | A | 独股导体 | ||
B | 7-19根绞合导体 | |||
R | 多股绞合导体 |